Laser calculator
Pick your laser, enter your LightBurn settings, read off the physics.
Laser & material
LightBurn settings
The operating parameters you dial into your job.
Power60 %
Source parameters
Adjust to match your exact hardware. Defaults from the selected laser.
Derived metrics
limiting at maxpulsed
Spot Ø
35 µm
measured
Spot area
9.62e-6 cm²
Avg power
18 W
Areal dose
60 J/cm²
energy per unit area
Pulse energy
0.45 mJ
power-limited
Peak power
3,462 W
Pulse fluence
46.77 J/cm²
Peak irradiance
3.60e+8 W/cm²
Pulse pitch
25 µm
beam travel between pulses
Overlap along scan
29%
Line overlap
14%
Pulses / point
1.4
along-scan coverage
Energy deposition heatmap
Accumulated dose over a 0.28 mm square of surface. Each dot is one pulse.
moderate overlap
100 µm
0local dose (J/cm²)97
Select a target material to model peak surface temperature and the marking regime.
Sensitivity sweep
How areal dose responds as one setting varies — everything else held at your current values.
Dashed line marks your current speed = 1,000 mm/s.