Laser calculator
Pick your laser, enter your LightBurn settings, read off the physics.
Laser & material
LightBurn settings
The operating parameters you dial into your job.
Power60 %
Source parameters
Adjust to match your exact hardware. Defaults from the selected laser.
Derived metrics
limiting at maxpulsed
Spot Ø
35 µm
measured
Spot area
9.62e-6 cm²
Avg power
36 W
Areal dose
120 J/cm²
energy per unit area
Pulse energy
0.6 mJ
power-limited
Peak power
6,000 W
Pulse fluence
62.36 J/cm²
Peak irradiance
6.24e+8 W/cm²
Pulse pitch
16.7 µm
beam travel between pulses
Overlap along scan
52%
Line overlap
14%
Pulses / point
2.1
along-scan coverage
Energy deposition heatmap
Accumulated dose over a 0.28 mm square of surface. Each dot is one pulse.
heavy overlap
100 µm
0local dose (J/cm²)166
Select a target material to model peak surface temperature and the marking regime.
Sensitivity sweep
How areal dose responds as one setting varies — everything else held at your current values.
Dashed line marks your current speed = 1,000 mm/s.